|
|
Connector Terminals (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires. They are usually used to connect wiring among various items of equipment within an enclosure or to make connections among individually enclosed items. Since terminal blocks are readily available for a wide range of wire sizes and terminal quantity, they are one of the most flexible types of electrical connector available. Some disadvantages are that connecting wires is more difficult than simply plugging in a cable and the terminals are generally not very well protected from contact with persons or foreign conducting materials. One type of terminal block accepts wires that are prepared only by removing (stripping) a short length of insulation from the end. Another type accepts wires that have ring or ***de terminal lugs crimped onto the wires. Printed circuit board (PCB) mounted terminal blocks allow individual wires to be connected to the circuit board. PCB mounted terminal blocks are soldered to the board, but they are available in a pull-apart version that allows the wire-connecting half of the block to be unplugged from the part that is soldered to the PCB.
|
| Company: |
WINTOP INTERNATIONAL ELECTRONICS CO.,LIMITED
|
| Contact: |
Mr. Keven Wang |
| Address: |
HEXING ROAD,SHATOU INDUSTRIAL PARK,CHANGAN TOWN |
| Postcode: |
523866 |
| Tel: |
86-769-85333730 |
| Fax: |
86-769-85333730 |
| E-mail: |
|
|
|
|
Home
